TEST: Netac N530S 2TB SATA SSD

Technical data
Image
Manufacturer	Netac
Model number	N530S-2TB
Storage capacity	2048 GB (1863 GiB)
pSLC-Cache	>300 GB approx.
Read speed	530 MB/s
Write speed	500 MB/s
Interface	SATA 6 Gbps
Connection	2.5"
Controller	YEESTOR YS9082HP
Price	ca. 0 AUD (= 0,05 $ / GB)
Paid link	Buy on Amazon

Compare Product

Compared to the top performer*

Read speed

98 %

Write speed

86 %

*) Test result evaluated according to AS SSD Score within the same size.

AS SSD Benchmark

Standard performance test

The standard test was performed with a 1 GB file. A total score of 643 points was achieved.

AS SSD	Read:	Write:
Seq in megabytes per second	511,41 MB/s	416,55 MB/s
4K in megabytes per second	26,35 MB/s	87,63 MB/s
4K-64Thrd in megabytes per second	149,22 MB/s	165,33 MB/s
Access time in milliseconds	0,182 ms	0,225 ms
Score	227	295
Total score	643

Copy Performance Test

A common everyday situation is simulated here. Three test folders are created:

• ISO (folder with two large files)
• Program (folder with many small files)
• Game (folder with small and large files)

The three folders are copied using the Windows Copy command (the cache remains enabled). The practical test of February 20, 2025 shows the performance for simultaneous write and read operations. The lower the duration, the better the performance.

AS SSD Copy-Benchmark	Transfer rate:	Duration:
ISO two large files	947,28 MB/s	1,13 s
Program many small files	682,55 MB/s	2,06 s
Game small and large files	1811,07 MB/s	0,76 s

Compression Performance Test

Here, the writing and reading speed of the the Netac SATA SSDSSD is measured depending on the compressibility of the data (according to the manufacturer, these should be 530MB/s and 500MB/s respectively).

CrystalDiskMark Benchmark

Here, two sequential and two random performance tests are performed, similar to the ones performed on the AS SSD.

CDM	Read [MB/s]	Write [MB/s]
SEQ1M Q8T1	543,58	452,76
SEQ1M Q1T1	515,72	447,81
RND4K Q32T16	158,53	179,37
RND4K Q1T1	27,81	95,65

HD Tune Pro Endurance test

A long-term test was performed here to make full use of the memory capacity. You can see when a cache is full and the writing performance decreases. A test file of 300 GB was written to the medium. The exact cache size could not be determined, because the test file did not exhaust the cache (brought it to the limit).At least the test file could be read with an average write speed of 517 MB/s and written with 441 MB/s.

HD Tune Pro Benchmark

HD Tune writes a 1 GB file to the Netac SATA SSD. The transfer data of the read speed is displayed graphically. The minimum, maximum and average values are also determined. The determined access time and burst rate are also displayed.

ATTO Disk Benchmark

Here, a 256 MB file is written several times to the Netac SATA SSD . The I/O block size varies (from 512 bytes to 64 megabytes). The larger the blocks, the faster they can be written and read.

SSD-Z Benchmark

Similar to HD Tune, a 500 MB file is written to the Netac SATA SSD here. is written. The transfer data is displayed. The more constant the line, the better.

The benchmark test was performed on February 20, 2025.
Information about the test system can be found at the bottom of the home page.
As an Amazon Associate I earn from qualifying purchases.